Have you ever encountered content that was “not available in your region” while surfing the web?
Have you ever wanted to watch one of the shows that Netflix has available in another country?
I bet you have, especially if you live outside the United States of America. The solution to this issue is easy enough: you can use a proxy server or VPN service. But there are two issues with that approach:
- All your internet traffic is going through the VPN. If this can result in very notable delays when surfing your normal websites.
- You usually have no insight into what kind of logging you VPN provider does. So you really shouldn’t do any sensitive stuff over that connection.
Ideally you would want all of your normal surfing to go out through your normal internet connection and all the region specific stuff through a VPN or some other proxy.
And you can actually build something to do this with Squid. Squid is an Open Source proxy server.
A proxy Server sits between your browser and the websites you want to surf to. It accepts all your requests to surf to certain websites and processes them according to its configuration. Once it has determined that the request is valid, it will contact the web server for you and fetch the content you want. It will then forward it to your browser.
Since it sits in the middle of your traffic, it is the perfect place to redirect some traffic through another connection.
This diagram visualizes the difference between the two options for you:
And this is really just the start of your capabilities of Squid. While this tutorial will only show you a few basics of squid and how you can redirect some content over a VPN or another Squid server, there is so much more that can be done with Squid:
- Are you on a connection with a fairly low Volume available (like some mobile contracts)?
No problem! Just crank up the caching in squid and repeated visits of the same website won’t be as demanding on your volume.
- Have kids that that visit bad websites?
No problem! You can use squid to filter the internet by pretty much any criteria your want. And you can do it on a per user or computer basis if you need to.
- You hate ads on websites, but maintaining you Ad-Blockers across all devices is annoying?
No worries! You can use squid as your Ad-Filter.
Continue reading How to escape geoblocking by content providers with Squid
Do you know if all the Data on your File Server is OK?
Unless you are already using ZFS, Btrfs or ReFS you don’t. If your file server is a couple of years old, there is a very good chance that your Data is NOT OK.
Your server hardware might tell you everything is OK but that does not really tell you much because none of your monitoring systems check the actual data.
ZFS on the other had knows if your data is ok and can even repair it. I upgraded my file server recently. All the old disks that were still in the pool at the time were OK according to their SMART values. yet look what the monthly check told me: Just think about that: In just one month almost 2MB of data got corrupted. And right now you don’t know if your server has similar issues. If you did not know it yet this particular issue has a name: Bit Rot and it gets worse the older your current hardware is and more likely the larger your disks are.
You might not realise it but 2MB is a lot of data. It can be an important document or picture. Or it can be that it is just 2MB of a huge CAD file that is totally unreadable without those 2MB.
Granted my old server is quite a bit of an extreme example because I postponed the upgrade quite a bit longer than I originally wanted to. And the disks in it were not meant for this workload.
But I have seen quite a few that storage servers or NAS boxes remained almost untouched until a disk failed or they were full. So old hardware is not all that uncommon, especially at home and in the SMB market.
Now you might think setting up a new file server is easy right? You could just take Server 2012 with ReFS and Storage pools and be done with it.
Technically that is correct, but even in Windows there is really quite a bit more to consider. That being said I want to make the case for Open Source because for this purpose it is simply better than Windows.
In particular I want to show you how to build your file server with ZFS and Linux, two proven Open Source technologies. When you are done the Server will integrate nicely into your windows environment. Your users will not know the difference and you don’t have to get headaches from trying to license Windows correctly.
Continue reading The shocking Truth about the current state of your Data: How to built a fully encrypted file server with ZFS and Linux to avoid data loss and corruption
Have you upgraded any of your Debian systems to Jessie yet?
No? Then read on so that you can avoid some of the possible pitfalls that come with this upgrade. Continue reading Upgrading Debian Guests on Proxmox to Jessie
If you are reading this you are probably making my life harder
E-Mail sucks! Your users just keep clicking the links in those damn phishing mails. And you can’t do anything about it. Hell somebody might be sending spam in your name and you have no idea about it. Let me blow your mind: You can solve these problems, for free. And I will introduce you the tools you need.
The cure to your E-Mail headaches hides behind three small acronyms:
- SPF: Sender Policy framework, tells others which mail servers are authorized to send E-Mail for your domain.
- DKIM: Domain Keys Identified Mail, uses encryption and DNS to verify an E-Mail sender and that it was not altered in transit
- DMARC: Domain based Message Authentication, Reporting and Conformance. Builds on SPF and DKIM and implements a policy and reporting system around them
Continue reading How to eliminate spam and protect your name with DMARC
Setting up a Mumble server is fairly simple, but I had a few problems to get it to play nice with my Active Directory. And since there wasn’t exactly a great deal of documentation on the subject, I figured that I should write a short How To. Continue reading Setting up an Active Directory authenticated Mumble Server
A while ago somebody came to me with a problem. A bunch of Services on their Server stopped working. The admin password in the documentation didn’t work. The Server in question was a SBS with a bunch of additional software that was critical to the business. My questions for Backups were answered with silence.
Continue reading How to reset a lost password for your only Windows Domain Admin
Recently I had to set up an Oracle Apex Server. Unfortunately the Apex Installer is delivered only as Windows 32 Bit installer and as a Linux 64 Bit RPM package.
Since I did not have any 32 Bit windows running, and neither any Linux system, that normally uses RPM packages, I decided to give Oracle Linux a try as base for an Oracle APEX Server.
What is Apex?
APEX is a rapid application development tool from Oracle. It lets you design, implement and deploy database applications with a very easy to use web gui. For common task like showing reports or creating forms for data entry you can use one of the many prepared templates. With APEX you could create an entire application around your database with little to no knowledge of any programming or scripting language.
Continue reading Installing Oracle Linux and Apex
One of our customers needed a way to use multiple mail domains. He already had a SBS2011, The Exchange Server on it was configured for the primary E-Mail Domain of the Company. The E-Mails from this Domain were fetched with the POP3 connector and all outgoing Mail was sent to the smart host of the E-Mail Provider.
The additional E-Mail Domains required a similar setup.
Unfortunately Exchange does not allow you to change the smart host for outgoing E-Mail based on the sender. There are third party Exchange addons, that do provide this ability, but I preferred to solve the problem with a Linux Mail Server. The configuration I will describe to you is fairly basic and the scenario it is used in is somewhat special. But the Article will still give you a fairly good impression on how to get a basic Mail Server running and how all the different pieces work together.
Continue reading Debian Wheezy E-Mail Relay for multiple Domains and IMAP Server with Postfix Dovecot and Fetchmail
I have been using Horde for quite some time as my Webmail solution. Unfortunately the Update from Horde 4 to Horde 5 always produced some issues on my system, so I decided to do a fresh install. My old Horde was a very simple Setup: It used the IMAP authentication of IMP to authenticate users against my Active Directory. While this certainly works, this time around I want to configure Horde to authenticate against my Active Directory directly. Additionally I wanted my to use my Active Directory as Global Address Book for Horde.
Continue reading Installing Horde 5 and configuring it for Active Directory and Dovecot
In the past I have referred to using Virtual machines and Containers, but i have never actually introduced the platform I use for my virtualisation. Today I will rectify this oversight.
Continue reading Proxmox a Linux based Hypervisor